USED HURCO Large capacity VMX64 Vertical Mill
LOOKS LIKE NEW! LOW HOURS – $94,995

Hurco VMX-64 VMC, Winmax 4 control, 64″ x 34″ x 30″ travels  1,400 spindle hours – New 2012


Hurco VMX-64 VMC, Winmax control, 64″ x 34″ x 30″ travels, 1,400 spindle hours, New 2012

Price if new – $195,000

Hurco VMX-64 VMC, Winmax control, 64″ x 34″ x 30″ travels, 1,400 spindle hours, New 2012
Specifications for HURCO VMX64-40 Taper 
Capacity:VMX64 40 taper
X, Y, Z -axis Travel64”, 34”, 30”
Table Working Surface66” x 35”
Table T-Slots7 x .71 on 4.92 Centers
Maximum Table Load6000 lb.
Spindle Nose to Table6” to 36”
Coolant Capacity140 gallons
Spindle:VMX64 40 taper
Spindle TaperCAT 40
Spindle Speed12,000 RPM
Spindle Motor Horsepower (1 min.)24 HP
Spindle Motor Torque (1 min.)175 lb-ft @ 720 RPM
High Torque Option RPM10,000 RPM
High Torque Option Rating210 ft-lb @ 600 RPM
Motion:VMX64 40 taper
Rapid Traverse Rate X,Y (ipm)709 ipm
Rapid Traverse Rate Z (ipm)530 ipm
Cutting Feed Rate600 ipm
Least Command Increment0.0001”
Positioning Accuracy-/+ 0.0002”
Repeatability-/+ 0.0001”
Automatic Tool Changer:VMX64 40 taper
Number of Stations24 / CAT 40
Tool to Tool ATC Time3 Seconds
Tool Changer TypeElectronic
Maximum Tool Diameter3.2”
Maximum Tool Length11.8”
Floor Space Required (W x D x H)155.0” x 104.7” x 121”
Maximum Operating Dimensions (W x D x H)249.5” x 186.2” x 121”
Machine Weight 29,920 lbs
Machine Shipping Weight32,120 lbs
Machine Shipping Dimensions (W x D x H)175.2” x 113.8” x 131.9”
Voltage Required208-240 VAC / 60Hz
Power Rating / Full Load KVA38 KVA
Air Requirements5 CFM @ 80-100 psi

Dual Screen HURCO
WinMax 4 Control

The power of the WinMax Control, is the result of Hurco’s three decades of customer-centered software experience combined with the proven platform of Microsoft Windows. Power packed with 25 new features and hundreds of enhancements to existing software features, our engineers designed WinMax to maximize efficiency, increase productivity, and improve surface finish. The WinMax control is equipped with two programming options so you can decide the best programming method for each job—Hurco’s shop floor programming, called Hurco Conversational, or NC (M and G codes) part programming.

Conversational programming allows you to program a part at the machine by reading the print or program worksheet. As you program the part, prompts and questions appear on the screen. You respond by selecting machine operations or entering part dimensions.  The software steps you through.

NC part programs can be created using the CNC software on the control or imported from an offline CAM System. With an enhanced NC interpreter, multi-line NC run time monitor with a G-Code modal display, and canned G-Code probing cycles, the NC side of the Max control is just as powerful as the Conversational programming method for which Hurco is known.


Hurco User-Friendly Max-4 CNC Control powered by WinMax


Request A Quote


Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.