The TRQ20 is a quill head tool room mill built for versatility: a 4.125 inch quill with 6 inches of travel, a tilting CT40 head, and a belt driven spindle with an 8:1 back gear for high torque work. A Meehanite cast iron frame, hardened and ground box ways with Turcite surfaces, and a powered drawbar round out the package.
Specifications for the Milltronics TRQ20 are listed below as published on milltronics.com (Milltronics publishes imperial figures only). Milltronics machines are built by Milltronics USA, a division of Hurco Companies, Inc., and are sold and supported in Southern California by MASCO.
Specifications
| Table size | 54 × 16 in |
|---|---|
| Max workpiece weight | 1,323 lbs |
| X / Y / Z travels | 39.37 × 19.68 × 23.62 in |
|---|
| Spindle speed | 4,000 rpm |
|---|---|
| Spindle taper | CT40 |
| Spindle horsepower | 14.75/7.5 hp |
| Rapid traverse | 500 ipm |
|---|
| Control | Milltronics 9000 INSPIRE |
|---|---|
| Number of axes | 3 |
| Machine weight | 5,953 lbs |
|---|---|
| Machine footprint | 115 × 123 in Nominal Operating (W × D) |
Specifications are provided by the manufacturer, are subject to change, and do not constitute a warranty. Published pricing excludes tax, freight, installation, and tooling unless stated.
