The VC series is Takumi's heavy duty general purpose 3-axis line, designed with FEM analysis for rigidity and built on a robust one-piece casting with 45 mm roller-type linear guideways. Direct drive BIG-PLUS CAT 40 spindles, pre-tensioned direct-coupled ballscrews, 1,417 ipm rapids, and an integrated washdown and chip management system come standard.
Specifications for the Takumi VC1052 are listed below in imperial and metric, as published by Takumi USA. It ships with the Fanuc 0i Plus control, with AI Contouring Control II, Machine Condition Selection, and Manual Guide i standard. Takumi is a division of Hurco Companies, with its technology center in Indianapolis. Sold and supported in Southern California by MASCO.
Specifications
| Table size | 45.67 × 20.47 in1,160 × 520 mm |
|---|---|
| Max workpiece weight | 1,433 lbs650 kg |
| Tool capacity | 24 tools |
| X / Y / Z travels | 41.7 × 20.5 × 24 in1,060 × 520 × 610 mm |
|---|
| Spindle speed | 15,000 rpm |
|---|---|
| Spindle taper | CAT 40 BIG-PLUS |
| Rapid traverse | 1,417 ipm36 m/min |
|---|
| Control | Fanuc 0i Plus |
|---|---|
| Number of axes | 3 |
| Machine weight | 13,007 lbs5,900 kg |
|---|
Specifications are provided by the manufacturer, are subject to change, and do not constitute a warranty. Published pricing excludes tax, freight, installation, and tooling unless stated.
