The Gen Turn MYS machines pair a main and sub spindle with a single BMT live tool turret and a full Y axis for milling off centerline. Work passes from the main to the sub spindle and comes off complete, with a Marposs tool probe for setup and a parts catcher with conveyor standard.
Specifications for the Gen Turn C42-MYS are listed below in imperial and metric, as published in Expand Machinery's 2024 GENTURN catalog. Expand Machinery is headquartered in Chatsworth, California; Gen Turn machines are sold and supported in Southern California by MASCO.
Specifications
| Bar capacity | 1 5/8 in (1.654 in)42 mm |
|---|---|
| Chuck size | 6 in Kitagawa main, 5 in Kitagawa sub |
| Swing over bed | 9.84 in250 mm |
| Tool capacity | 10 stations |
| Turret | 10-station BMT-55 live tool turret |
| X / Y / Z travels | 4.33 × ±1.181 × 10.633 in (X × Y × Z)110 × ±30 × 270 mm |
|---|
| Spindle speed | 6,000 rpm (built-in main, belt-driven sub) |
|---|---|
| Spindle bore / draw tube | 1.98 in50.5 mm |
| Spindle horsepower | 10 hp (7.5 kW 30-minute rated, main and sub) |
| Rapid traverse | 787 ipm20 m/min |
|---|
| Number of axes | 6 |
|---|
| Machine weight | 4,410 lbs2,000 kg |
|---|---|
| Machine footprint | 85 × 81 × 60 in (W × H × D, with rear discharge chip conveyor) |
Specifications are provided by the manufacturer, are subject to change, and do not constitute a warranty. Published pricing excludes tax, freight, installation, and tooling unless stated.
