The TRL series combination lathes offer both manual and CNC operation in the same machine, built for tool rooms and job shops. Swings run from 16.7 to 27 inches with spindle bores up to 7.28 inches and 8-station bi-directional turrets, configurable with bed length and bore options.
Specifications for the Milltronics TRL16/60 are listed below as published on milltronics.com (Milltronics publishes imperial figures only). Milltronics machines are built by Milltronics USA, a division of Hurco Companies, Inc., and are sold and supported in Southern California by MASCO.
Specifications
| Swing over bed | 16.7 in |
|---|---|
| Tool capacity | 8 stations |
| Turret | 8-station bi-directional automatic turret |
| X / Y / Z travels | 11 × 66.5 in (X × Z) |
|---|
| Spindle speed | 100-4,000 rpm |
|---|---|
| Spindle bore / draw tube | 2.04 in (bore) |
| Spindle horsepower | 14.75/10 hp |
| Rapid traverse | 500 ipm |
|---|
| Control | Milltronics 9000 DGI |
|---|---|
| Number of axes | 2 |
| Machine weight | 6,680 lbs |
|---|---|
| Machine footprint | 186 × 91 in Normal Operating (W × D) |
Specifications are provided by the manufacturer, are subject to change, and do not constitute a warranty. Published pricing excludes tax, freight, installation, and tooling unless stated.
